Fast US Shipping 
Keep the phone out of your hands and bike safely
Fumbling behind the wheel? Not cool. You could get into an accident. So put the phone down — but keep it secure and steady as you bike your way to your destination. No more serious text-and-bike accidents or “oh crap, I dropped my phone” moments!
A cinch to set up and applicable anywhere
Use the holder’s watch-like button strap to clip the holder to a bike handlebar, shopping cart handle, treadmill handle, or baby stroller handle. Our handle is ultra adjustable for a versatile use — you don’t need to have a bike to use this smartphone must-have.
Fit to most smartphones
Our 360° Bicycle Phone Holder measures 2.5 x 4.5 inches and fits any smartphone that is 4 to 6.5 inches in height. Note for most phones, you might have to remove any thick protective casing to fit the device into the holder.
Turn it any direction
With 360-degree rotation, you can angle your phone any way without restriction. Discover ease in following a GPS map or reading a text however you want.
Super durable for trusty hold
Our phone holder is made from high-quality silicone that holds on tight and strong, all without scratching or clipping your handles of your bike or equipment of use. It’s a great alternative to hard plastics used by many other competitor products or similar phone-holding solutions.
I think the mount is great. It allows for a variety of sizes to grasp onto. The phone holder itself at first I didn’t think much of it, but it actually grips the phone (iPhone 7 and 8 plus) very well. Attached to my bike, the phones were snug and easy to function.
Perfect for motorcycle . It is helpful for this small bike that likes to have destinations of fun and enjoys getting lost but needs directions home. Keeps your phone safe and accessible. If your phone has cover it takes a little wiggle to put on but no biggie.
The best part, I can also use this in my car! It fits into the grab handle in the middle of the dashboard between the seats. It'll be fantastic for road trips, whether I'm on my bike or in my car. Can't wait!
Purchased this for my wife so what she could mount her phone to her bike and utilize her music and GPS. The mount is simple to install on a bike handle bar and does a good job holding the phone in place. The only minor complaint she had was that her Otter box phone case increased the dimensions of her phone such that the holder was stretched a bit more than she would have liked leaving her concerned that it might fail a bit prematurely. So far it is working well but only time will tell how well it holds up.
I just installed this and am very pleased with how easy it was and how sturdy it feels. The padded material inside the grip cushions the handlebar and provides extra security. The socket where the ball sits also tightens nicely. They way the ring is shaped makes it easy to grip it to get it nice and tight. I haven’t tested it yet on the road, but am looking forward to it.
I specifically bought this for my iPhone 7 Plus that I have in a fairly slim case and with a Popsocket on the back. I was happy to see that it does in fact fit my phone and holds it securely. This is so easy to install on a bike and then be able to move it to another if you so choose. Initially, putting my phone in the holder was tough. It does fit tightly. After putting it in and removing a couple of times, it seemed easier but without losing grip. The case seems like it will hold up and doesn't look like it's overstretched. Overall, I'm really pleased with this product.
I shopped around before choosing this cell phone holder. I bike on dirt roads quite a bit, and I wanted to be sure that I purchased a product that would be sturdy enough to handle frequent bumps. This product was it! It was easy to attach to my handlebar, and easy to place my phone, complete with OtterBox case, in the rubber guards. Both case and phone have remained stable for 2 weeks of pretty challenging tests. There is no movement of either, and I am never worried about the phone falling. I highly recommend this product.
Having gone through several other bike mounts that broke in less than a year, I decided to try this one because of the good reviews. So far, I am impressed with it so far after a few rides. The mount is super easy to install on any handlebar and has a great grip that doesn't slip. The actual phone holder is a nice silicon web that fits almost any phone. This model does not have the plastic side bars to hold the phone, which actually is good as they have been the source of other bike mount failures I've experienced. I should say that while the mount will accommodate a phone with a case, it can be a bit tight depending on the thickness of your case. So you may want to take your phone out of the case before placing into the mount. T
Really love the simplicity of the installation. You just hand turn the knob to tighten the mount on the handle and you're done (plus it makes removal just as easy). My previous mount had rubber pieces you needed to stick in to fit different sized handles plus you needed a screwdriver to tighten it in. There is an additional rotating knob on the back of the actual phone mount which secures the phone into any position. You are trading some ease of movement (since you need to loosen/tighten each time you want to rotate your phone) for stability as it does seem to lock it into place well and you can still set the phone in any position horizontal, vertical, or other. Overall seems very well made and thought out.
Ordered this mount to help me while I'm out cycling with my son. Came fast, installed in seconds and holds my Google Pixel 2XL perfectly!!
Just received this mount today and installed in less than 15 seconds on my handlebar. Luv the way it Clamps onto the handlebar with a few quick turns. My iPhone 8 Plus fit pretty securely although it seems that you have to stretch the rubber a bit too far and I worry about it snapping, but didn't happen. Road about 10 miles with it and it felt pretty sturdy. Just make sure the adjustment is tight on the ball mount for the bracket to keep the phone from slowly tilting down when riding over bumpy areas and not sure if this may be a problem as I'm still testing it for the second ride.
I put it on my suzuki maruader 800. Is really great at speeds under 50. However going 50 and above there was tons of vibrations in the rubber mount. So good for around town.
Well so far so good. Just a few issues. Pros: 1) It fits large phones with otterbox cases - even though it seems too small. 2) It fits handlebars 3) It seems to stay put even over bumps for the most part Cons: 1) It seems floppy and loose (but it somehow stays put just fine). I am concerned this will get worse. It really needs some rigidity. 2) It does not fit larger posts (it says it does but it wont wrap around the frame) 3) I am worried the straps that hold the phone will break eventually, they are very thin. 4) The handlebar strap is not 100% solid. It still rotates around the handlebar even when strapped down to the max. Its OK for the price, but if you want something rigid and solid keep looking. This mount has zero rigidity, its basically 100% silicone except for the rotating mechanism.
What I love about this mount the most is that it is very configurable. It can be mounted in many locations, including my treadmill) and I can adjust the position of the phone screen to fit my preference. Also, it has a serious grip. If you properly tighten this thing it will not come off.
There are certain things where the risk of loss requires a hard look at how to prevent it from happening. The thought of losing my phone at 50 mph made me uneasy. The Crab Grab is a great solution for anyone looking for an easy to use holder that keeps your phone in the perfect position. Installation and adjustment could not be easier, it took less than a minute for the whole operation. Every situation is unique, my handlebars are close to the gas tank, so I needed to move the unit further up. It has the flexibility to deal with almost any mount.